Difference between revisions of "Part Lists"

Revision as of 23:16, 1 November 2012

Linkage connector.jpg

Linkage connector
Linkage backup.jpg

The linkage backup is required to keep the linkage from vibrating and flexing of the engines which can even damage the hull. There are two differnt Linkage backups for both sides each.
Linkage mount.jpg

Linkage mount
Motor mount.jpg

Motor mount
Rudder adapter.jpg

The rudder adapter connects the Servo with the Rudder and is attached to the servo horn.
Rudder backup.jpg

The rudder backup keeps the rudders from flexing and is needed to guide the axis of the Rudder. Also the three Rudder backups are connected to increase the stability of the whole delta rudder.
Servo mount.jpg

Servo mount

All parts can also be downloaded at Thingiverse.com

The silent_runner hull is generated with an excel-sheet that also shows how to plot the envelope parts.

The first tab shows the input parameters, already tuned to the silent_runner shape, feel free to play around with the input parameter.
The second tab shows the shape off the inflated envelope
The third tab shows one of the three elements you will need to assemble the hull
The last tab incorporates all data necessary for plotting the elements. If you find out which column is the right one for plotting, you´ve understood the table and you´re absolutely ready to build the hull.

The original file can be found at: rc_airship_regatta/files/

@@ Line 1: / Line 1: @@
 [[Category:Hardware]]
+*Component	Weight [g]	Quantity	Total [g]
+*Hull	100	1	89
+*Motors	15	2	30
+*Motor Mounts	16	1	16
+*Propeller	4	2	8
+*Lipo 2S	26	1	26
+*Fins	16	3	48
+*Servo	5	3	15
+*Receiver	8	1	8
+*Arduino Pro Mini	5	1	5
+*Wires	20	1	20
+*Ballast	10	1	10
+*ESC	11	2	22
+*Total weight:			297
 ==Printed Parts==
   <gallery>