Part Lists
| Component | Weight[g] | Quantity |
|---|---|---|
| Hull | 100 | 1 |
| Motors | 15 | 2 |
| ESC | 11 | 2 |
| Motor mount | 16 | 1 |
| Propeller | 4 | 2 |
| Lipo 2S | 26 | 1 |
| Fins | 16 | 3 |
| Servo | 5 | 3 |
| Receiver | 8 | 1 |
| Arduino | 5 | 1 |
| Wires | 20 | 1 |
| Ballast | 10 | 1 |
Printed Parts
- Linkage connector.jpg
Linkage connector
- Linkage backup.jpg
The linkage backup is required to keep the linkage from vibrating and flexing of the engines which can even damage the hull. There are two differnt Linkage backups for both sides each.
- Linkage mount.jpg
Linkage mount
- Motor mount.jpg
Motor mount
- Rudder adapter.jpg
The rudder adapter connects the Servo with the Rudder and is attached to the servo horn.
- Rudder backup.jpg
The rudder backup keeps the rudders from flexing and is needed to guide the axis of the Rudder. Also the three Rudder backups are connected to increase the stability of the whole delta rudder.
- Servo mount.jpg
Servo mount
Download Links
All parts can also be downloaded at Thingiverse.com
- File:Linkage Connector.stl
- File:Linkage Backup.stl
- File:Linkage Backup2.stl
- File:Linkage Mount.stl
- File:Motor Mount.stl
- File:Rudder Adapter.stl
- File:Rudder Backup.stl
- File:Servo Mount.stl
Hull
The silent_runner hull is generated with an excel-sheet that also shows how to plot the envelope parts.
- The first tab shows the input parameters, already tuned to the silent_runner shape, feel free to play around with the input parameter.
- The second tab shows the shape off the inflated envelope
- The third tab shows one of the three elements you will need to assemble the hull
- The last tab incorporates all data necessary for plotting the elements. If you find out which column is the right one for plotting, you´ve understood the table and you´re absolutely ready to build the hull.
Download the file here: File:Gertler4155 Silent Runner slender.xls
The original file can be found at: rc_airship_regatta/files/
